Extend your Checkmk monitoring with packages created by community members. Or create your own packages and share the here with the rest of the community.
by tofkamp
Monitor Mikrotik SwOS routers by querying the web interface of the device: - System information and uptime - Temperatures - Fans - Power supplies - Ports (link, speed, duplex, flow control, RSTP, LAG, PoE) - Traffic, packet and error rates on the port services - SFP / QSFP modules - PoE total power - Spanning tree (RSTP) - Link aggregation (LAG) Issues and source [https://github.com/tofkamp/checkmk\_swos](https://github.com/tofkamp/checkmk_swos) ++Compatibility matrix SwitchOS/Release++ | | v2.18 | v2.19 | | | | --- | --- | --- | --- | --- | | 1\.0.0 | Yes | Yes | | | Actively used in production with the following models: - CRS354-48P-4S\+2Q\+ - CRS326-24S\+2Q\+
by lhausdoerfer
A Checkmk 2.5 MKP plugin that monitors the storage utilization of every bucket in a Wasabi cloud storage account via the Wasabi Stats API. Buckets are discovered automatically — no bucket names are configured anywhere.
by doctore74
A Checkmk **special agent** plus check plugins to monitor GitLab through its REST API (v4) — both **self-hosted** (CE/EE) and **GitLab.com (SaaS)** — built in the style of the bundled Jenkins special agent. Tested layout for **Checkmk 2\.5.0**, GitLab EE 19.x, and tested successfully against a **GitLab.com free account**. Some services are admin- or EE-only and therefore self-hosted only — see [Compatibility](#compatibility).
by alex23
This plugin monitors digital optical diagnostics of SFP, SFP\+ and multi-channel QSFP transceivers on Extreme Networks switches running VOSS / Fabric Engine via SNMP. Features: - Monitors temperature, supply voltage, laser bias current, optical transmit power (TX) and receive power (RX) - Supports multi-channel transceivers with separate monitoring services for each optical channel - Provides performance metrics and graphs for all monitored sensor values. - Supports device-provided thresholds, custom warning/critical levels, or monitoring without thresholds - Automatically excludes transceivers without DOM support and administratively disabled interfaces
by TonyBostonTB
MikroTik RouterOS monitoring for CheckMK Monitors MikroTik RouterOS devices via the RouterOS API (v2, port 8729/SSL or 8728) or the RESTful API. Provides checks for: - System health, fans, and temperature sensors - Power supply units (per-PSU voltage, current, and wattage), PoE consumption - BGP and OSPF neighbors - not tested - VRRP status - not tested - IPsec tunnels - not tested - Firewall rules (with optional disabled-rule visibility) - not tested - File age monitoring - RouterOS Info: model, serial number, RouterOS version (with minimum version enforcement) and RouterBOOT firmware (state if an upgrade is pending) - HW/SW inventory: model, serial number, RouterOS version, RouterBOOT firmware - License expiration (CHR) - WiFi per SSID: connected clients, signal strength and radio state, for the new wifi driver, the legacy wireless driver (not tested) and CAPsMAN, new and legacy (one controller covers all its access points) - HW/SW inventory of the access points managed by a CAPsMAN controller: identity, model, serial number, RouterOS version, base MAC Requirements: CheckMK 2.4 or later, RouterOS 7.x. Upgrading from 3.x: stored rules are migrated automatically on install. See "Migration from v3.x" in the README for the power service change. Changes per release are shown in the version description below. Full changelog: [https://github.com/TonyBostonTB/CMK\_Mikrotik/blob/main/CHANGELOG.MD](https://github.com/TonyBostonTB/CMK_Mikrotik/blob/main/CHANGELOG.MD) Issues and source: [https://github.com/TonyBostonTB/CMK\_Mikrotik](https://github.com/TonyBostonTB/CMK_Mikrotik) Based on the original plugin by Andrea Fadda (devilofhell87).
by rsander
Agent Plugin to check SSL certificates in specified directories Now with support to check signature algorithm Windows Plugin added JSON data in agent data section Is now able to ignore certificates with a short lifetime
by simonmeggle
Robotmk integrates Robot Framework results into Checkmk.
by lgbff
This check monitors the status of ssl cert checks on ssllab.com. Changelog: - 3\.2.0 no systemtime in agent output - 3\.x version for cmk 2.2 - 2\.1.0 change to python3 - 2\.0.1 fix datasource\_programm group definition - 2\.0.0 insert cache for api response - 1\.6.0 insert Agent status (line\[3\]) - 1\.5.3 change default status - 1\.5.2 Insert Agent Header infos - 1\.5.1 cache default settings - 1\.5.0 new data seperator (59) - 1\.4.9 fix display JSON Error on check result. - 1\.4.8 fix connect exeption - 1\.4.7 add default value for timeout - 1\.4.6 change timeout handling - 1\.4.5 fix inventory issue while JSON issues - 1\.4.4 change urlopen error handling - 1\.4.3 Rename check file - 1\.4.2 Fix check manpage - 1\.4.1 delete modul calls from check - 1\.4.0 changes for cmk version 1.4 - 1\.3.1 improve error handling.
by rsander
Plugin to gather Ceph statistics. ### Starting with Checkmk 2.4, this plug-in is distributed with Checkmk. No need to download this MKP. Use this MKP only if you want to monitor Ceph with Checkmk 2.2 or 2.3.